Vintage Star Wars Vehicle Wall Mount Bracket Display Stand X-Wing Falcon TIE

$6.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store galacticcollector
(839) 99.8%,

Location: Akron, New York
Ships to: US,
Item: 134203663114

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Movie:Star Wars: Episode IV – A New Hope
Type:Vehicle Wall Mount Bracket
Character:A-Wing Fighter,B-Wing Fighter,Darth Vader TIE Fighter,Imperial Cruiser,Imperial Troop Transporter,Landspeeder,Millennium Falcon,Rebel Transport,Slave 1,Snowspeeder,TIE Fighter,TIE Interceptor,X-Wing Fighter,Y-Wing Fighter
Scale:3.75
Franchise:Star Wars

This listing is for custom made brackets for displaying your vintage Star Wars vehicles on your wall. Vintage vehicles are considered the vehicles produced for the 3.75" figures from 1978 to 1984. These MAY fit the 90's era POTF vehicles, but I have NOT tested them on all POTF versions yet. See the list below for known POTF or other version compatibility. You can display your vintage Star Wars vehicles with the following brackets: the Millennium Falcon – comes with a latch/hook to hold the back canopy in place. Fits the vintage (1978), the 1995 electronic POTF Falcon, and the 2003 Original Trilogy Falcon.Slave 1 – fits vintage and POTF A-Wing Fighter – fits vintage Droids A-Wing and POTF. Extend landing gear and hook into rear landing gear opening.X-Wing Fighter – fits vintage standard (1978), vintage Battle Damaged (1978), Power Of the Force (1995), 2004 Original Trilogy, and the 2015 Poe Dameron X-Wings. See this listing for modern X-Wings.Y-Wing Fighter – requires the battery cover to be removed. Will work with Y-Wing facing up or down. Video on battery cover removal: https://youtu.be/n1JFAJoaqHQB-Wing Fighter – fits the vintage and the 2001 Power of the Jedi B-Wings. Requires the landing gear to be extended. Place the rectangular landing gear in the hole in the bracket, then close in the hooks from either side to latch it in place.Rebel Transport – requires the escape hatch to be removed. Rebel Transport must face up.Snowspeeder – fits vintage and POTFLandspeeder – fits vintage only, will NOT fit the POTF landspeeder.Twin Pod Cloud Car – I find the canopies want to open if you face it up, so I recommend facing it down.Imperial Cruiser/Troop Transporter – There is a screw on the vehicle that needs to get centered in the slot on the bracket – see pic. Slide nose end in first to engage hook, then set level against the wall.TIE Fighters – there are 3 versions: TIE Fighter – vintage standard, vintage Battle Damaged, and POTF TIEDarth Vader TIE Fighter (does NOT fit the POTF Vader Advanced TIE)TIE Interceptor – fits vintage and POTFI'm no longer making the Darth Vader or TIE Interceptor spacers. I have new models that use acrylic brackets for the larger winged TIEs (as well as brackets covering almost every TIE from vintage to modern) here:Click here for more TIE Bracket options. The standard TIE mount does fit all the TIES listed, but for the Vader and Interceptor, additional spacers are needed to accommodate the depth of the wings. If you are handy, you can make your own spacers. For Darth Vader's TIE Fighter, you will need to make a 3"x3"x3" cube to mount the bracket on. For the TIE Interceptor, you will need to make a 3"x3"x3/4" spacer to mount the bracket on. These can be made from wood, or 3D printed, see the photos under the TIE listing for examples. The regular TIE hanger does not need any additional spacers for the standard or Battle Damaged TIEs. I include an easy self tapping screw-in drywall anchor and screw with each bracket. All you need is a drill or even just a screwdriver! A tape measure helps if you want things lined up nicely too I guess… See a video on how to install the brackets here:https://youtu.be/kJu84qiSi8M I combine shipping on multiple purchases. If you order multiple brackets from this listing, add them to your cart before paying, and eBay will automatically combine. If you order across different listings, add them to your cart, and request an invoice before paying. If you pay for shipping from multiple listings instead of requesting an invoice, I will gladly refund the difference to my actual postage costs. I have put a lot of effort into developing and testing these brackets. They are very sturdy – tested for a week holding a 15 pound weight with no issues (for reference, the Falcon comes in a little over 3 lbs). I have these in use with my own collection. Having said that – these are use at your own risk! (I'm not responsible for toys crashing to the ground…) I do tweak the designs as I identify opportunities for improvement or the ability to speedup the 3D printing process – so the items you receive may look slightly different than the pictures and videos show. About 3D Printed items: They may have minor visual defects from the printing process. This is normal and does not impact function. Plus, you can't really see these brackets from behind the vehicles. Visit my eBay store for other hard to find vintage Star Wars parts, repair kits, and vehicle wall mounting hangers! About Galactic Collector: I am a collector of vintage Star Wars action figures, vehicles, and playsets. I regularly restore vintage pieces. I never part out complete items. I often buy broken/damaged/parts lots for salvage, and will resell leftover parts from those to hopefully benefit other restorers out there.

Frequently Asked Questions About Vintage Star Wars Vehicle Wall Mount Bracket Display Stand X-Wing Falcon TIE in My Website

shiriheller.com is the best online shopping platform where you can buy Vintage Star Wars Vehicle Wall Mount Bracket Display Stand X-Wing Falcon TIE from renowned brand(s). shiriheller.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Vintage Star Wars Vehicle Wall Mount Bracket Display Stand X-Wing Falcon TIE on shiriheller.com?